A sewer cleanup is often a relatively unnoticed part of the plumbing system of your home, yet most people have only ever heard of them when a sewer backup develops. A sewer cleanup prevents water from backing up and clogging up the pipes, thereby preventing sewage from getting into your home and contaminating your water supply.
Good sewer cleanup involves digging out all the clog and making sure that all the pipes in your home are properly cleaned. A simple way to do this is by calling a plumber, but it’s much more convenient and efficient to do it yourself. A typical sewer cleanup is fairly simple to do on your own with minimal tools and equipment. However, you can easily end up wasting money doing this job, so it’s important to follow these tips before you start cleaning out your drains. If you do not follow these tips, you could find that your cleanup has become an eyesore.
Before you dig up the clog, you should always check the drain. You will want to be sure that there are no obstructions or any sort of obstruction present in the pipes. In addition, it is important to know whether the clog is inside the pipe or outside. The most common type of clog to find is inside the pipe. Therefore, you should first make sure that the clog is inside the pipe before beginning to dig out the clog. If it is inside the pipe, then you might consider using a sewer snake to remove the clog.
Once you have determined that the clog is inside the pipe, you should now determine whether you are going to use a sewer snake or a plunger to remove the clog. It is generally recommended that you do not use both methods at the same time, however. Plunge is usually best for removing clogs that are within the pipes, while snake is best for removing clogs that are outside the pipes. If you plan on using a snake, you should buy a high-qualityquality model. A good quality snake should be able to reach the depths necessary to reach the clog. However, if you are planning on using a plunger, make sure you are purchasing a good quality plunger. Asking around and reading reviews can help you get the best plunger.
Once you have removed the clog from the drain, it is important to then remove all debris from the drain. This includes tree roots, leaves, sticks, and dirt. If you have any wood, such as branches, that is on top of the drain, then you should make sure that they are removed before putting the drainage back in place. Once the clog is removed and the drain is back in place, you will want to close the drain and seal it to prevent any future clog problems. To make sure that the drain is closed tight, you will need to put some sealant or similar substance between the top of the drain and the floor drain.
If your sewer cleanouts are not too complicated, you should not need any specialized equipment to finish your work. However, if your blog is more complex and involves complex equipment and skill, then you may want to invest in some sewer snake augers or other devices to help you dig your sewer cleanup.